Skip to main content

Printer settings

Use the Printer screen to check the printer is connected and to run a test print.

  1. Turn on your Receipt Booth. The printer should switch on automatically. If it does not, flip the hardware switch inside the booth.
  2. The Receipt Booth app should launch automatically once the printer is on.
  3. Open Printer in the sidebar. The connected printer is highlighted in blue.
  4. Tap the printer once to see its information.
  5. Tap Test print to print your current settings.

What the Printer screen looks like​

This is the screen before the printer is connected, so it says No Printers Found. Once the printer is on and connected, it appears in the list instead.

The Printer screen before a printer is connected, with three areas numbered

  1. Printer — tap it in the sidebar to open this screen.
  2. No Printers Found — what you see until the printer is switched on and connected.
  3. Refresh — searches for printers again. The app also keeps checking by itself.

If it says "No Printers Found"​

Check each of these:

  1. The printer is powered on (the hardware switch inside the booth).
  2. The USB data cable runs from the printer to the tablet connector.
  3. The tablet is charging through the tablet connector.

Still not connecting? See Troubleshooting.